Doorgaan naar artikel

Gratis verzending & €100 & 21 dagen retourtijd in de EU

Laatste dagen: Krijg 10% korting. Code: GEARUP10
Cortazu

Barrier CT Pro™

Cortazu’s waterdichte, ademende stoftechnologie. Gemaakt voor slecht weer.

Ontwikkeld door Cortazu. Onafhankelijk getest.

Barrier CT Pro™ combineert bescherming tegen regen, ademend vermogen en een constructie die speciaal is ontworpen voor buiten. Hieronder kun je de metingen en rapporten achter Barrier CT Pro™ bekijken, te beginnen met de waterdichtheid.

Barrier CT Pro — The Waterproofness Test
The waterproofness test
15,000
mm H₂O · JIS L 1092
61,200+ Testing equipment maximum — fabric still dry
50,000 Minimum for Barrier CT Pro
30,000 Where most hardshell tests stop
20,000 Sufficient for heavy rain

Proven performance. Twice the industry standard.

  • How it works. The laboratory steadily increases water pressure against the fabric to measure its resistance to water penetration.
  • The result. At 61,200 mm, no water had passed through. The test ended at the equipment’s maximum pressure.
  • Check the evidence. Explore the independent laboratory’s report and the test methods below.
De vier standaarden

Barrier CT Pro™ ruimt alle vier tegelijk op.

Waterdicht

Waterdicht

50.000 mm+
Voorkomt dat regen door de stof dringt.


Ademend

Ademend

20.000 g/m2/24 uur+
Laat vochtdamp ontsnappen terwijl u beweegt.

Duurzaam

Duurzaam

50.000 toeren
Bestand tegen wrijving tijdens gebruik.

Waterafstotendheid

Waterafstotendheid

Graad 5 (hoogste)
Zorgt ervoor dat regen op de buitenstof parelt en eraf rolt.

In de praktijk getest

Toen gaven we het aan mensen die het zouden merken als het misging.

Elk Cortazu-product wordt in het veld getest door specialisten voordat het jou bereikt.

Cortazu
Vijf dagen, Schotse Hooglanden

Ned Helyar | Wandelexpert
Zware regen en wind tijdens 6 uur durende wandelingen; 4–8°C; pak in voor de hele route.

Cortazu
Freeride toerskiën, Tirol

Ernst Wagensveld | Tester van buitenuitrusting
−10 tot −20°C, zware inspanning bergopwaarts, herhaalde overgangen.

Cortazu
Graatoversteek, Noorwegen

Damien Rijken | Outdoor storyteller
Regen en wind, volledig blootgesteld, 36 uur lang gedragen zonder het uit te doen.

Video laden:
Barrier CT Pro™-garantie

Bescherming bewezen. Prestaties gepubliceerd.

prestatierapport
Barrier CT Pro — The full protocol
The full protocol

Everything you'd ask before buying. Answered up front.

Four tests, one fabric, all four at once. A construction that clears three and misses one doesn't carry the mark. Here is what gets measured, how each test is run, what we require, and what came back.

Full report published Independent laboratory Retested on every change
Waterproofness How well the fabric keeps water from getting through, even in heavy downpours. 61,200+ mm
Waterproofness How well the fabric keeps water from getting through, even in heavy downpours.
JIS L 1092 · 7.1 Method B Water pressure is applied to the face of the fabric at 100 kPa/min, distilled water at 20±3°C. We require the test to run until water comes through — not to stop at the pass mark.
50,000 mm H₂O
61,200+ mm H₂O Test rig reached its maximum. The fabric had not let water through.
Water repellency How well water beads up and rolls off the outside instead of soaking in. Grade 5
Water repellency How well water beads up and rolls off the outside instead of soaking in.
JIS L 1092 · 7.2 spray rating A standardised spray is directed at the treated face fabric and the surface is graded from 1 to 5.
Grade 5
Grade 5 The highest grade on the scale.
Breathability How well heat and sweat can escape, helping you stay comfortable when moving. 27,685 g/m²/24h
Breathability How well heat and sweat can escape, helping you stay comfortable when moving.
JIS L 1099 · Method B-1 Moisture vapour moving from the inside out through the laminate, measured over 24 hours.
20,000 g/m²/24h
27,685 g/m²/24h Cleared the threshold for high-output use.
Abrasion resistance How well the fabric stands up to rubbing and wear from (back)packs, rocks and repeated use. 50,000+ rubs
Abrasion resistance How well the fabric stands up to rubbing and wear from (back)packs, rocks and repeated use.
JIS L 1096 The face fabric is rubbed against a standard surface to a defined end point and checked for structural failure.
50,000 rubs
50,000+ rubs Face fabric intact, ratings held.
Barrier CT Pro — Fabric Comparison
Performance, compared

Read the test, not the label.

Barrier CT Pro™ is developed with specialists to our own specifications. Independently tested, with all results published transparently to read.

Compare the essentials
Barrier CT Pro™
3-layer hardshell fabric
Industry standard
Typical premium hardshell fabric
Waterproofness
Barrier CT Pro™
61,200+mm
Equipment maximum · JIS L 1092
Industry standard
20,000–30,000mm
Typical premium rating
Breathability
Barrier CT Pro™
27,685g/m²/24h
JIS L 1099 B-1
Industry standard
15,000–20,000g/m²/24h
Typical premium rating
Abrasion resistance
Barrier CT Pro™
50,000+rubs
JIS L 1096
Industry standard
Rarely published
No rub count listed
Test evidence
Barrier CT Pro™
Full lab reports & methods published
Industry standard
Headline ratings only
Full reports rarely shared
Cortazu
Ontwikkeld via CT Lab™

Wij licentiëren geen prestaties. Wij bouwen ze.

Ontwikkeld met speciale stoffen. Onafhankelijk getest.

ontdek het CT-lab