Barrier CT Pro | Tech. pagina

Barrier CT Pro

Lees de test, daarna de prijs.

Onze stoftechnologie met volledige bescherming. Onafhankelijk getest. Volledig gepubliceerd.

Barrier CT Pro — The Test

15,000

mm H₂O · JIS L 1092

62,000+ Testing equipment maximum — fabric still dry

50,000 Minimum for Barrier CT Pro

30,000 Where most hardshell tests stop

20,000 Heavy rain, sitting still

The test

Proven performance. Twice the industry standard.

What happens. Water pressure is pushed against the face of the fabric and raised steadily until water comes through. The result is the pressure at which it does.
Ours didn't. At 62,000mm the test ended because the equipment reached its limit, not because the fabric did. We don't know where Barrier CT Pro gives. We know it is higher than this.
What we ask for. Run it to the end. Report every sample, not the best one.

De vier standaarden

Barrier CT Pro stof voldoet aan alle vier tegelijk.

Waterdicht

50.000 mm+
Testmethode: JIS L 1092, Sectie 7.1 – Methode B (Hoge Druk)

Lees rapport

Ademend

20.000 g/m2/24 uur+
Testmethode: JIS L 1099, Methode B-1

lees verslag

Duurzaam

50.000 wrijvingen
Testmethode: JIS L 1096

lees rapport

Waterafstotendheid

Graad 5 (hoogste)
Testmethode: JIS L 1092, paragraaf 7.2 – Spuitclassificatie

rapport lezen

In de praktijk getest

Toen gaven we het aan mensen die het zouden merken als het misging.

Omstandigheden, duur, activiteit, oordeel. Geschreven door de tester en gepubliceerd zoals geschreven, inclusief de uitstapjes die de stof terug naar de ontwikkeling stuurden.

Vijf dagen, Schotse Hooglanden

Ned Helyar | Wandelexpert
Zware regen en wind tijdens 6 uur durende wandelingen; 4–8°C; pak in voor de hele route.

Freeride toerskiën, Tirol

Ernst Wagensveld | Tester van buitenuitrusting
−10 tot −20°C, zware inspanning bergopwaarts, herhaalde overgangen.

Graatoversteek, Noorwegen

Damien Rijken | Outdoor storyteller
Regen en wind, volledig blootgesteld, 36 uur lang gedragen zonder het uit te doen.

Barrier CT Pro Garantie

Test wat we meten. Beloof wat we leveren.

Twee verschillende dingen, in die volgorde. Het laboratoriumresultaat vertelt u wat de stof deed op de dag dat het werd getest. De garantie is dat wij er twee winters van reëel gebruik achter staan.

PRESTATIERAPPORT

Barrier CT Pro — The full protocol

The full protocol

Everything you'd ask before buying. Answered up front.

Four tests, one fabric, all four at once. A construction that clears three and misses one doesn't carry the mark. Here is what gets measured, how each test is run, what we require, and what came back.

Independent laboratory Full report published Retested on every change

Waterproofness Whether rain stays out when it's driven hard and you're carrying a pack. 62,000+ mm

Waterproofness Whether rain stays out when it's driven hard and you're carrying a pack.

JIS L 1092 · 7.1 Method B Water pressure is applied to the face of the fabric at 100 kPa/min, distilled water at 20±3°C. We require the test to run until water comes through — not to stop at the pass mark.

50,000 mm H₂O

62,000+ mm H₂O Test rig reached its maximum. The fabric had not let water through.

Water repellency Whether the outer face beads water or soaks it up. Grade 5

Water repellency Whether the outer face beads water or soaks it up.

JIS L 1092 · 7.2 spray rating A standardised spray is directed at the treated face fabric and the surface is graded from 1 to 5.

Grade 5

Grade 5 The highest grade on the scale.

Breathability Whether sweat gets out while you're working hard uphill. 20,000+ g/m²/24h

Breathability Whether sweat gets out while you're working hard uphill.

JIS L 1099 · Method B-1 Moisture vapour moving from the inside out through the laminate, measured over 24 hours.

20,000 g/m²/24h

20,000+ g/m²/24h Cleared the threshold for high-output use.